Filter
Top Products
60
8. Advanced Operations (KX-F1100AL only)
Re-recording a greeting message
You can change the content of the ANS/FAX mode
greeting message and mailbox greeting message
from a remote location.
1
Call your unit.
2
For the ANS/FAX mode greeting message:
Press your remote ANS ID.
For the mailbox greeting message:
Press J and A, B or C (desired
mailbox no.). Then press the mailbox
password.
3
Press G to start recording.
¡A long beep will sound.
4
Speak immediately after the long beep (up to
16 seconds).
¡If you pause for over 2 seconds while
recording, the unit will beep and stop the
greeting message recording. Repeat from
step 2 within 10 seconds.
5
When finished, press I.
¡The new greeting message will be played.
Turning on/off pager alert
You can remotely turn on/off the pager alert for
incoming message if it has been programmed with
a pager number in advance (see page 61).
1
Call your unit.
2
For the common pager alert;
Press the remote ANS ID.
For a mailbox pager alert;
Press J and the mailbox number (A, B
or C), then press the mailbox password.
3
To turn on the pager alert, press HA.
To turn off the pager alert, press HB.
To skip the greeting message
Callers can record their messages without listening
to the greeting message.
After calling your unit, dial @ during the greeting
message playback.
¡The unit will skip the rest of the greeting message
and start recording.