Filter
Top Products
50
8. Advanced Operations
This feature allows your unit to call your pager automatically each time your unit receives a fax message.
This feature will be only effective for automatic pager.
1
Press (MENU).
2
Press K, then G@.
3
Press (START/SET).
4
Press (‹) or (›) to select “ON”.
¡If this feature is not required, select “OFF”.
5
Press (START/SET).
6
Enter your pager service number.
If necessary, press (PAUSE) 4 times.
Contact your pager company regarding the
proper pause time.
7
If your pager has the ability to display phone
numbers, enter the number that you wish to
appear in the display.
Press k after entering the phone number.
8
Press (START/SET).
9
Press (MENU).
Note:
You may enter a total of 30 digits and/or pauses in
steps 6 and 7.
NO.=
MODE=ON [ÿŸ]
MODE=OFF [ÿŸ]
FAX PAGER
SYSTEM SET UP
Pager alert for fax reception
(MENU)
(‹)/(›)
(START/SET)Dial keypad
(PAUSE)