Filter
Top Products
31
Sending Faxes
1
Open the document feeder tray.
2
Adjust the width of the document guides to
the size of the document.
3
Insert the document (up to 15 pages) FACE
DOWN until a single beep is heard and the
unit grabs the document.
Display:
4
If necessary, press or repeatedly
to select the desired resolution (p. 29).
5
Enter the fax number.
Using stations 1–7:
Press the desired station key.
Using stations 8–14:
Press , then press the desired
station key.
Using navigator directory:
Press , then press or to
display the desired item and .
●
For further details about using the
directory, see page 23.
LOWER
STANDARD
PRESS NAVI.[+ -]
FACE DOWN
Display
FAX START
STOP
Document
feeder tray
Document guides
Station keys
LOWER
Before using this feature, program the desired names and telephone numbers into one-touch
dial and navigator directory (p. 20, 21).
If your unit does not send a fax
●
Confirm the stored telephone number on the
display and check that the number dialed is
answered by the other party’s machine
(p. 23).
●
The connecting tone will be heard during
dialing to tell you the status of the other
party’s machine (feature #76 on page 55).
Fax auto redial
If the line is busy or if there is no answer, the unit will
automatically redial the number up to 2 times.
●
This feature is also available for delayed transmission
(feature #25 on page 52).
●
During redial, the following will be displayed.
Display:
●
To cancel redialing, press .
STOP
WAITING REDIAL
Sending a fax using one-touch dial and
navigator directory!
FAX START