Filter
Top Products
32
Sending Faxes
FACE DOWN
SET
Display
Station keys
STOP
LOWER
1
Insert the document FACE DOWN.
●
If necessary, press
or
repeatedly to
select the desired resolution (p. 29).
2
Press .
Display:
3
Press or until the following is
displayed.
4
Press to start programming the items
you want to transmit.
5
Enter items.
Using stations 2–7:
Press the desired station key.
Example:
Using stations 8–14:
Press , then press the desired
station key.
Using navigator directory:
Press or until the desired item is
displayed and press .
●
To program other items, repeat this step
(up to 20 items).
6
Press to start transmission to the
programmed items.
●
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each item, calling each
number sequentially.
●
After transmission, the stored document
will be erased automatically, and the unit
will automatically print a broadcast sending
report.
SET
LOWER
DIR=ANN [01]
SEND:PRESS SET
DIR= [00]
NAVI.[+@-]@&@SET
SET
<ONE1TIME1BROAD>
PRESS SET
DIRECTORY[+ -]
One time broadcast transmission!
This feature is useful for sending the same document to selected parties only once. Select the
parties using one-touch dial or navigator directory for each transmission.
Note:
●
If you select the “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages
that the unit can transmit will decrease.
●
If the document exceeds the memory
capacity (p. 73), sending will be canceled.
●
If one of the items is busy or does not
answer, the item will be skipped. All skipped
items will be redialed up to 2 times after all of
the other items have been called.
To cancel the broadcast setting
1. Press while the unit displays the
following.
Display:
●
The display will show the following.
2. Press .
SET
SEND1CANCELED?
YES:SET/NO:STOP
1BROADCASTING
STOP
SET