Filter
Top Products
Setting the auto disconnection
To answer a call with an extension
telephone in TEL/FAX mode
(p. 41).
AUTO DISCONNECT
MODE=ON [±]
Features Summary
54
Code Feature & Display Settings How the unit operates
#44
#46
Setting the friendly reception
To receive a fax automatically when
you answer a call and hear a fax
calling tone (slow beep).
FRIENDLY RCV
MODE=ON [±]
ON
OFF
“ON”: You do not have to press
for fax reception.
FAX START
#41
Changing the fax activation code
If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 43).
●
This code is also used to receive
a voice message and a fax in the
same call (p. 43).
FAX ACTIVATION
MODE=ON [±]
ON /
CODE= 9
OFF
1.
Follow steps 1 and 2 above.
2.
Press or
to select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
●
Do not enter “0000”.
MENU
SET
SET
(The default setting is in bold type.)
ON
OFF
#49
ON /
CODE= 0
OFF
1. Follow steps 1 and 2 above.
2.
Press or
to select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
MENU
SET
SET
How to set menu options
Note:
●
Step 3 may be slightly different depending on the
feature.
●
See page 49 for more details.
Advanced features (cont.)!
Programming table (cont.)
1. Press .
2. Press or until the following is
displayed.
Display:
Press and press or until
the desired feature is displayed.
SET
ADVANCED MODE
PRESS SET
MENU
3. Press or until the desired setting
is displayed.
4. Press .
5. Press .
MENU
SET
Setting the memory reception
alert
To alert you with a beeping sound
when a document which has been
received is stored into memory due
to some existing problem.
RECEIVE ALERT
MODE=ON [±]
If you are alerted by a slow
beeping sound, clear the printing
problem and make sure the unit is
supplied with paper to print the
stored document. The beeps will
stop.