Filter
Top Products
35
Sending Faxes
Sending the same document to pre-programmed parties
FACE DOWN
STOP
SET
Note:
●
If you select the “FINE”, “SUPER FINE” or
“PHOTO” resolution, the number of pages
that the unit can transmit will decrease.
●
If the document exceeds the memory
capacity (p. 83), sending will be cancelled.
●
If one of the entries is busy or does not
answer, it will be skipped. All skipped entries
will be redialled up to 2 times after all of the
other entries have been called.
1
Insert the document FACE DOWN.
●
If necessary, press + or - repeatedly to
select the desired resolution (p. 30).
2
Press ).
Display:
3
Press + or - until the following is
displayed.
4
Press w.
● The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each entry, calling each
number sequentially.
●
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report
.
<BROADCAST>
SEND:PRESS SET
DIRECTORY [+ -]
To cancel the broadcast setting
1. Press { while the unit displays the
following.
Display:
●
The display will show the following.
2. Press w.
SEND CANCELLED?
YES:SET/NO:STOP
@BROADCASTING
To send to selected parties only once
You can also select the parties for each transmission.
1. Follow steps 1 and 2 above.
2. Press + or - until the following is displayed.
Display:
3. Press w to start programming the entries you
want to transmit.
4. Press + or - until the desired entry you want to
transmit is displayed.
Example:
5. Press w.
Example:
●
To program other entries, repeat steps 4 and 5
(up to 20 entries).
6. Press w to start transmission to the programmed
entries.
DIR=Bill [01]
SEND:PRESS SET
Bill
6543210
DIR= [00]
NAVI.[+ -]A&ASET
<ONE1TIME1BROAD>
PRESS SET