Filter
Top Products
112
Setup from the Front Panel and WebSetup
Completing setup from Fiery WebSetup
After you have performed an initial Setup from the printer’s front panel (see
page 106), you must complete the process of configuring Setup options
using Fiery WebSetup, one of the Fiery WebTools. You can also use
Fiery WebSetup to remotely view and modify Setup options later.
Before you can access the Fiery WebTools, you must complete the
following:
• Initial Setup, specifically, setting the printer’s IP address, and subnet mask
as well as its gateway from the front panel; see page 106.
• The procedures described in “Setting up Fiery WebTools” on page 70.
To use the Fiery WebTools via the Internet or your site’s intranet, you need
an Internet browser and the IP address or DNS name of the KX-P8420.
To access Fiery WebSetup:
1
Start up your Internet browser application.
2
Enter the IP address or the DNS name of the KX-P8420
in the URL line of your browser.
Get the IP address or DNS name from your network administrator.
The KX-P8420 home page appears. The individual Fiery WebTools
are listed on the left. To display information about a particular tool,
click the question mark next to its name.
Accessing
Fiery WebSetup