Filter
Top Products
159
Care and Maintenance
5
a) Holding the green tab on the right, slide the fuser out
until the safety catch stops it.
b) Press the green lever on the left to release the safety
catch.
6
a) Hold the fuser as shown below, and slide it out of the
printer.
b) Close the front door.
SAFETY CAUTIONS:
• The fuser unit weighs approximately 3.1 kg {6.8 lbs.}. Take care
when handling it.
• Do not touch the roller and the parts around the roller when
handling the fuser, because they may be hot.
a
b
b
a
Roller