Filter
Top Products
157
Care and Maintenance
2
Use the green handles to pull out the paper feeder.
3
Remove the jammed media on the paper feeder.
4
Reinsert the paper feeder and close the left side door.
To clear media jams in location C:
1
a
) Open the printer front door.
b
) Turn the fuser’s large green knob counterclockwise
and remove the jammed media.
The jammed media will go out from inside the printer.
If the jammed media does not go out, proceed to the step 4.
.
SAFETY CAUTION:
•
The fuser is hot; to avoid personal injury, turn off the printer and
wait 10 minutes (after opening the front door) for the fuser to cool
before touching it.
a
b