Filter
Top Products
183
Care and Maintenance
Some operation errors cause the error indicator to blink and printing to stop.
A message will be displayed on the front panel until the problem is fixed. If
the front panel message includes the instruction, Call for Service, contact
an authorized service representative.
In addition, if the following conditions occur, turn off and unplug the printer
from the outlet and contact a qualified service representative:
• The power cord or plug is damaged or frayed.
• Liquid has been spilled into the printer.
• The printer has been exposed to rain or water.
• The printer does not operate normally though the operating instructions
are being followed. Adjust only those controls that are described in the
operating instructions; improper adjustment of other controls may result in
damage and will often require extensive work to restore the printer to
normal operation.
Transfer
wearing out
Transfer unit will need to be replaced soon.
Transparency Tray
Not installed
Install transparency tray.
Upper Left side door
Open
Close Left side door.
Upper Tray
Empty
Add media to Upper tray.
Upper Tray
Not installed
Install Upper tray.
Warming Up Printer is warming up.
Yellow Toner Cartridge
Not installed
Install yellow toner cartridge.
Yellow Toner
Empty
Replace yellow toner.
Message Corrective action/additional information
Front panel
service calls