Filter
Top Products
231
Care and Maintenance
To clear media jams in location D with face down printing:
SAFETY CAUTION:
•
The fuser is hot; to avoid personal injury, turn off the printer and wait
10 minutes (after opening the printer’s front door) for the fuser to cool
before touching it.
NOTE:
•
First check the exit opening for media that has jammed and folded like an
accordion. It is especially difficult to see if the media is transparency film.
1
a) Open the printer’s front door.
b) Pull open the access door (above the plastic output
tray); see if the media is visible.
2
a) Turn the large green knob on the fuser
counterclockwise.
b) Remove the media from inside the access door.
b
a
b
a