Filter
Top Products
48
Setup
3
Plug the end of the ADF cable into the ADF connector
located on the back of the scanner.
Loading media
The printer is shipped with one media tray (either Letter Paper or A4 Paper)
installed, however the printer supports five different trays as shown in the
following table.
NOTES:
• Make sure that you load the correct media. Each tray is designed and
labeled for only paper or transparency. If you load the incorrect media
type in a tray, it may cause a jam.
• If you have the 2nd cassette feeder (option) installed and you wish to use
the automatic cassette-switching feature (for a large print job, for
example), make sure that all trays in the printer are the same media type
and size.
• The transparency tray should only be inserted in the upper or middle tray
slots.
• Do not use a ink jet transparency that may be wrapped around the
fuser roller and cause damage.
Tray Size
A4 Paper 210 mm x 297 mm (8.3" x 11.7")
A4 Transparency 210 mm x 297 mm (8.3" x 11.7")
Letter Paper 216 mm x 279 mm (8.5" x 11")
Letter Transparency 216 mm x 279 mm (8.5" x 11")
Legal Paper 216 mm x 356 mm (8.5" x 14")
ADF cable
ADF connector