Filter
Top Products
Adjusting the sound to the desired setting
You can adjust the volume and balance to the desired settings.
Adjustment procedure <for volume adjustment>
1. Press the MENU button to display the MENU screen.
2. Press the “ ” and “
” buttons to select “AUDIO”.
3. Press the “ ” and “ ” buttons to display the AUDIO screen.
4. Press the “ ” and “
” buttons to select “VOLUME”.
To adjust the balance, select “BALANCE” instead.
5. Press the ENTER, “
” or “ ” button to display the VOLUME individual
adjustment screen.
6. Continue pressing the “
” and “ ” buttons to adjust the volume setting.
The current setting will be displayed on the screen by numerals and a bar.
The adjustment range is between 0 and 63.
(However, the adjustment range for the
balance setting is -32–+31.)
Adjustment func-
While “VOLUME” is selected, the volume of
tion display
the sound coming from the built-in speakers
and the output level of the signal from the
AUDIO OUT terminal will change.
Numeric adjustment
While “BALANCE” is selected, the left and
level display
right balance of the sound coming from the
built-in speaker and the output level of the
signal from the AUDIO OUT terminal will
change.
Bar display
NOTE:
If no button is pressed for approximately 5 seconds while an individual adjustment screen is being displayed, the
display will return to the AUDIO screen.
If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if
it is already being displayed.
Volume adjustment from the AUDIO screen works in exactly the same way as using the VOL +/- volume
adjustment buttons on the remote control unit.
If audio equipment is connected to the AUDIO OUT terminal, no sound will be output from the projector’s built-in
speakers, and the output level from the AUDIO OUT terminal will be adjusted. However, if the volume
adjustment level is set to “0”, no audio signal will be output.
27