Panasonic PT-RW430UK Projector User Manual


 
Chapter 4Settings — [NETWORK] menu
ENGLISH - 107
[Network cong] page
Click [Detailed set up] [Network cong].
f Click [Network cong] to display the [CAUTION!] screen.
f The current settings are displayed by pressing the [Next] button.
f The following setting change screen is displayed by clicking the [Change] button.
1
2
3
4
5
6
7
8
1 [Projector name]
Enter the name of the projector. Enter the host name if it is
required when using a DHCP server etc.
2 [DHCP ON]/[DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
3 [IP address]
Enter the IP address when not using a DHCP server.
4 [Subnet mask]
Enter the subnet mask when not using a DHCP server.
5 [Default gateway]
Enter the default gateway address when not using a DHCP
server.
6 [DNS1]
Enter the DNS1 server address.
Permissible characters for the entry of DNS1 server address
(primary):
Numbers (0 - 9), period (.)
(Example: 192.168.0.253)
7 [DNS2]
Enter the DNS2 server address.
Available characters for the entry of DNS2 server address
(secondary):
Numbers (0 - 9), period (.)
(Example: 192.168.0.254)
8 [Back]/[Next]
Click the [Back] button to return to the original screen. The
current settings are displayed by pressing the [Next] button.
Click the [Submit] button to update the settings.
Note
f When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click
[Network cong] again since the following operation will not be guaranteed.
f Changing LAN settings while connected to the LAN may cause the connection to cut out.