Filter
Top Products
Chapter 4 Settings — [SECURITY] menu
ENGLISH - 95
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select the item from the
sub-menu.
Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.
f When the projector is used for the rst time
Initial password: Press awsqawsq in order, and press the <ENTER> button.
f After selecting the item, press asqw to set.
Attention
f When you select the [SECURITY] menu and press the <ENTER> button, entering a password is required. Enter the preset password and
then continue operations of the [SECURITY] menu.
f When the password has been changed previously, enter the changed password, and press the <ENTER> button.
Note
f The entered password is displayed with * mark on the screen.
f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.
[SECURITY PASSWORD]
The [SECURITY PASSWORD] screen is displayed when the power is turned on. If an incorrect password has been entered, operations other
than the power <v/b> button and the <AV MUTE> button are not available.
1) Press as to select [SECURITY PASSWORD].
2) Press qw to switch [SECURITY PASSWORD].
f The items will switch each time you press the button.
[OFF] Disables the security password entry.
[ON] Enables the security password entry.
Note
f [SECURITY PASSWORD] is set to [OFF] at the time of purchase or when [ALL USER DATA] has been initialized.
f Change the password periodically that is hard to guess.
f The security password is enabled after setting [SECURITY PASSWORD] to [ON] and turning the <MAIN POWER> switch to <OFF>.
[SECURITY PASSWORD CHANGE]
Change the security password.
1) Press as to select [SECURITY PASSWORD CHANGE].
2) Press the <ENTER> button.
f The [SECURITY PASSWORD CHANGE] screen is displayed.
3) Press asqw and the number (<1> - <6>) buttons to set the password.
f Up to eight button operations can be set.
4) Press the <ENTER> button.
5) Re-enter the password for the confirmation.
6) Press the <ENTER> button.
Note
f The entered password is displayed with * mark on the screen.
f If numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost.
Consult your dealer for the initialization method.