Filter
Top Products
Chapter 3 Basic Operations — Operating with the remote control
42 - ENGLISH
Using the Function button
Frequently used operations can be assigned to the buttons from <FUNC1> to <FUNC3> on the remote control to be used as simple shortcut
buttons.
button
1) Press the <FUNC1> to <FUNC3> buttons.
When assigning operations to the buttons from <FUNC1> to <FUNC3>
1) Press the <MENU> on the control panel or the remote control to display the menu items (main menu,
sub-menu, or details menu) you want to assign.
f Refer to “Navigating through the menu” (x page 44) for the operation of the on-screen menu.
2) Press and hold any buttons from <FUNC1> to <FUNC3> for three seconds or more.
Note
f After settings have been completed, F1, F2, or F3 is displayed on the left of the assigned menu item (main menu, sub-menu, or details
menu) when <FUNC1>, <FUNC2>, or <FUNC3> is set, respectively.
f Perform the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 87) when deallocating functions.
Using the ECO management function
The setting screen related to the ECO management can be displayed.
button
1) Press the <ECO> button on the remote control.
Note
f Refer to the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] (x page 77) for details.
Adjusting the volume
The audio output volume can be adjusted.
button
1) Press the <VOLUME+>/<VOLUME
-
> button on the remote control.
<VOLUME+> Increases the volume.
<VOLUME
-
> Decreases the volume.