Filter
Top Products
Chapter 4 Settings — [NETWORK] menu
104 - ENGLISH
Error information page
When [Error (Detail)] appears in the self-diagnosis display of the [Projector status] screen, click it to display the error details.
f The projector may go into the standby status to protect the projector depending on the contents of the error.
1
1 Self-diagnosis result display
Displays the item check results.
[OK]:
Indicates that operation is normal.
[FAILED]:
Indicates that there is a problem.
[WARNING]:
Indicates that there is a warning.
r Problem occurrence [FAILED] items
Parameter Description
[MAIN CPU BUS] There is a problem with the microcomputer circuitry. Consult your dealer.
[FAN] There is a problem with the fan or the fan drive circuit. Consult your dealer.
[INTAKE AIR TEMPERATURE]
The air intake temperature is too high. The projector may be used in an operating
environment where the temperature is high, such as near a heating appliance.
[OPTICS MODULE TEMPERATURE]
The temperature around the optics module inside the projector is high. The projector
may be used in an operating environment where the temperature is high, such as near a
heating appliance.
[INTERNAL AIR TEMPERATURE]
The temperature inside the projector is high. The projector may be used in an operating
environment where the temperature is high, such as near a heating appliance.
[LIGHT STATUS]
The light source failed to turn on or off. Wait a while until the light source cools off, and
then turn on the power.
[INTAKE AIR TEMP.SENSOR] There is a problem with the intake temperature detection sensor. Consult your dealer.
[OPTICS MODULE TEMP.SENSOR]
There is a problem with the temperature detection sensor around the optics module
inside the projector. Consult your dealer.
[INTERNAL AIR TEMP.SENSOR]
There is a problem with the sensor used to detect temperature inside the projector.
Consult your dealer.
[BATTERY] Replacement of built-in battery is required. Consult your dealer.
[PHOSPHER WHEEL]
There is a problem with the uorescent wheel or uorescent wheel drive circuit. Consult
your dealer.