Filter
Top Products
Chapter 4 Settings — [PICTURE] menu
ENGLISH - 49
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select the item from the sub-
menu.
Refer to “Navigating through the menu” (x page 44) for the operation of the menu screen.
f After selecting the item, press asqw to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1) Press as to select [PICTURE MODE].
2) Press qw to switch [PICTURE MODE].
f The items will switch each time you press the button.
[GRAPHIC] The image becomes suitable for input from the personal computer.
[STANDARD] The image becomes suitable for moving images in general.
[CINEMA] The image becomes suitable for movie sources.
[NATURAL] The image is sRGB compliant.
[REC709]
*1
The image is Rec.709 compliant.
[DICOM SIM.]
*1
The image becomes similar to that of DICOM Part 14 Grayscale Standard.
[DYNAMIC] Color and brightness are optimized and image becomes suitable for video content.
*1 Use the factory default for the settings under the [PICTURE] menu other than [PICTURE MODE].
Note
f The factory default picture mode is [GRAPHIC] for still image input signals and [STANDARD] for movie-based input signals.
f [DYNAMIC] cannot be selected when viewing 3D images. Even when [DYNAMIC] is selected while viewing 2D images, the setting is
switched to [GRAPHIC] automatically once viewing 3D images.
f Rec.709 is an abbreviation of “ITU-R Recommendation BT.709” and is color standard of high-denition television.
f DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.
[CONTRAST]
You can adjust the contrast of the colors.
1) Press as to select [CONTRAST].
2) Press qw or the <ENTER> button.
f The [CONTRAST] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation Adjustment Range of adjustment
Press the w button.
Brightens the screen and makes the color deeper.
-
31 - 31
Press the q button.
Darkens the screen and makes the color lighter.
Attention
f Adjust [BRIGHTNESS] rst when you need to adjust the black level.