Panasonic PT-RZ470UK Projector User Manual


 
Chapter 6Appendix — Technical information
ENGLISH - 127
<SERIAL IN> terminal
The <SERIAL IN> terminal of the connecting terminal of the projector conforms with RS-232C so that the projector can be connected to and
controlled from a computer.
Connection
Projector connecting terminals
Computer
D-Sub 9p (female)
D-Sub 9p (male)
Communication cable (straight)
DIGITAL LINK compatible device
Computer
D-Sub 9p (female)
Projector connecting terminals
DIGITAL LINK DIGITAL LINK
D-Sub 9p (male)
Communication cable (straight)
To connect directly
To connect a DIGITAL LINK compatible device
LAN cable (straight)
Note
f The destination of [RS-232C] (x page 86) must be set according to the connection method.
Pin assignments and signal names
D-Sub 9-pin (female)
Outside view
Pin No. Signal name Details
(1) (5)
(6) (9)
(1) NC
(2) TXD Transmitted data
(3) RXD Received data
(4) NC
(5) GND Earth
(6)
Connected internally(7) CTS
(8) RTS
(9) NC
Communication conditions (Factory default)
Signal level RS-232C-compliant
Sync. method Asynchronous
Baud rate 9 600 bps
Parity None
Character length 8 bits
Stop bit 1 bit
X parameter None
S parameter None