Panasonic PT-RZ470UK Projector User Manual


 
Chapter 2Getting Started — Setting up
26 - ENGLISH
Setting up
[PROJECTION METHOD] and [COOLING CONDITION]
There are six ways to set up the projector. Set the [PROJECTOR SETUP] menu [PROJECTION METHOD] and [COOLING CONDITION]
depending on the environment. Also set [COOLING CONDITION] correctly. Using with incorrect settings may shorten the life of light source.
Mounting on the ceiling and projecting forward Setting on a desk/oor and projecting from rear
(Using the translucent screen)
Menu item
*1
Method Menu item
*1
Method
[PROJECTION METHOD] [FRONT/CEILING] [PROJECTION METHOD] [REAR/FLOOR]
[COOLING CONDITION] [CEILING SETTING] [COOLING CONDITION] [FLOOR SETTING]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Setting on a desk/oor and projecting forward
Menu item
*1
Method Menu item
*1
Method
[PROJECTION METHOD] [REAR/CEILING] [PROJECTION METHOD] [FRONT/FLOOR]
[COOLING CONDITION] [CEILING SETTING] [COOLING CONDITION] [FLOOR SETTING]
Portrait setting and projecting from the rear
(Using the translucent screen)
Portrait setting and projecting forward
Menu item
*1
Method Menu item
*1
Method
[PROJECTION METHOD] [REAR/FLOOR] [PROJECTION METHOD] [FRONT/FLOOR]
[COOLING CONDITION] [PORTRAIT SETTING] [COOLING CONDITION] [PORTRAIT SETTING]
*1 For menu item details, refer to the [PROJECTOR SETUP] menu [PROJECTION METHOD] (x page 76) and [COOLING CONDITION]
(x page 77).
Parts for ceiling mount (optional)
You can install the projector using the optional ceiling mount bracket (Model No.: ET-PKR100H (for high ceilings), ET-PKR100S (for low
ceilings), or ET-PKR100P (for portrait)).
f Use only the ceiling mount brackets specied for this projector.
f Refer to the installation manual for the ceiling mount bracket when installing and setting up the bracket and the projector.
Attention
f To ensure projector performance and security, installation of the ceiling mount bracket must be carried out by your dealer or a qualied
technician.