Filter
Top Products
Chapter 4 Settings — [PROJECTOR SETUP] menu
88 - ENGLISH
3) Press as to select the function button (F1 - F3) in which assignment will be canceled.
4) Press the <DEFAULT> button on the remote control.
5) When the confirmation is displayed, select [OK] and press the <ENTER> button.
Note
f You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main menu, sub-
menu, or details menu), and then pressing any one of the corresponding <FUNC1> - <FUNC3> buttons for at least three seconds.
[AUDIO SETTING]
Set advanced audio functions.
Adjusting the volume
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [VOLUME].
4) Press qw to adjust the level.
Operation Adjustment Range of adjustment
Press the w button.
Increases the volume.
0 - 63
Press the q button.
Decreases the volume.
Adjusting the left/right audio balance
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [BALANCE].
4) Press qw to adjust the level.
Operation Adjustment Range of adjustment
Press the w button.
Increases the volume on the right.
L16 - R16
Press the q button.
Increases the volume on the left.
Setting the audio output during standby
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [IN STANDBY MODE].
4) Press qw to switch [IN STANDBY MODE].
f The items will switch each time you press the button.
[OFF] Turns off audio output during standby.
[ON] Turns on audio output during standby.
Note
f When [STANDBY MODE] (x page 79) of [ECO MANAGEMENT] is set to [ECO], audio cannot be output during standby.
f The projector has no built-in speakers.
Audio can be output via external audio systems connected to the audio output terminal.