Filter
Top Products
Chapter 4 Settings — [PROJECTOR SETUP] menu
84 - ENGLISH
Note
f When [SCHEDULE] is set to [ON], the [STANDBY MODE] setting is forcibly switched to [NORMAL], and the setting cannot be changed.
Even if [SCHEDULE] is then set to [OFF] when in this state, the setting of [STANDBY MODE] remains at [NORMAL].
How to assign a program
1) Press as to select [SCHEDULE].
2) Press qw to select [ON], and press the <ENTER> button.
f The [SCHEDULE] screen is displayed.
3) Select and assign program to each day of week.
f Press as to select the day of week, and press qw to select a program number.
f You can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
1) Press as to select [SCHEDULE].
2) Press qw to select [ON], and press the <ENTER> button.
f The [SCHEDULE] screen is displayed.
3) Press as to select [PROGRAM EDIT].
4) Press qw to select a program number, and press the <ENTER> button.
5) Press as to select a command number, and press the <ENTER> button.
f You can change the page using qw.
6) Press as to select [TIME], and press the <ENTER> button.
7) Press qw to select the hour and minute, press as to set the time, and then press the <ENTER>
button.
8) Press as to select [COMMAND].
9) Press qw to switch [COMMAND].
f The items will switch each time you press the button.
f For the detailed settings of [COMMAND], the details set in Step 11) are displayed.
[COMMAND]
Detailed settings of
[COMMAND]
Description
[POWER ON] ― Switches on the projector.
[STANDBY] ― Enters standby.
[AV MUTE]
[OFF] Disables the AV mute function.
[ON] Turns off the audio and video.
[INPUT]
[COMPUTER] Switches the input to COMPUTER.
[VIDEO] Switches the input to VIDEO.
[DVI-I] Switches the input to DVI-I.
[HDMI] Switches the input to HDMI.
[DIGITAL LINK] Sets the input to DIGITAL LINK.
[DIGITAL LINK INPUT]
[CURRENT]
Switches to DIGITAL LINK input with the currently selected
connection.
Can only be selected when [INPUT] is set to [DIGITAL LINK].
[INPUT1] - [INPUT10]
*1
Switches to DIGITAL LINK input, and that input switches to the
specied input when the Panasonic twisted-pair-cable transmitter is
connected. Can only be selected when [INPUT] is set to [DIGITAL
LINK].
[LIGHT POWER]
[NORMAL] Prioritizes brightness.
[ECO SAVE1]
Reduces the power by approximately 20 % in average compared to
[NORMAL] without affecting the brightness.
[ECO SAVE2]
Reduces the power by approximately 30 % in average compared to
[NORMAL], minimizing reduction in brightness.
[LOW] Saves more power and reduces brightness.