Panasonic PT-RZ470UK Projector User Manual


 
Chapter 4Settings — [3D SETTINGS] menu
ENGLISH - 65
[NORMAL] Do not change the [NORMAL] setting if the 3D images are displayed correctly.
[SWAPPED] Select this when left and right 3D images are swapped to be displayed.
Note
f When [3D MODE] is set to [3D SYNC] or [OFF], [DLP Link] cannot be set.
f Before changing the [DLP Link] setting, display 3D images.
When using VESA standard 3D eyewear
1) Press as to select [3D SYNC].
2) Press qw to switch [3D SYNC].
f The items will switch each time you press the button.
[NORMAL] Do not change the [NORMAL] setting if the 3D images are displayed correctly.
[SWAPPED] Select this when left and right 3D images are swapped to be displayed.
Note
f When [3D MODE] is set to [DLP Link] or [OFF], [3D SYNC] cannot be set.
f Before changing the [3D SYNC] setting, display 3D images.
[3D INPUT FORMAT]
Set the 3D format for the image signals being input.
Set a 3D format that matches the input signal.
1) Press as to select [3D INPUT FORMAT].
2) Press the <ENTER> button.
f The [3D INPUT FORMAT] screen is displayed.
3) Press as to select a 3D format.
[AUTO]
*1
Automatically detects 3D format of input image signals and displays images.
[SIDE BY SIDE] Forcibly displays 3D images in side by side format regardless of input image signals.
[TOP AND BOTTOM] Forcibly displays 3D images in top and bottom format regardless of input image signals.
[FRAME SEQUENTIAL] Forcibly displays 3D images in frame sequential format regardless of input image signals.
[NATIVE] Forcibly displays 2D images regardless of input image signals.
*1 Only for HDMI input/DIGITAL LINK input
4) Press the <ENTER> button.
Note
f This may not function properly for some connected external devices.
[SAFETY PRECAUTIONS MESSAGE]
Set to show or hide the safety precautions message related to 3D viewing when the projector is switched on.
1) Press as to select [SAFETY PRECAUTIONS MESSAGE].
2) Press qw to switch [SAFETY PRECAUTIONS MESSAGE].
f The items will switch each time you press the button.
[ON] Shows the safety precautions message related to 3D viewing when the projector is switched on.
[OFF] Hides the safety precautions message related to 3D viewing when the projector is switched on.
Note
f Set to [OFF] to hide the safety precautions message related to 3D viewing when the projector is switched on.
f A conrmation screen is displayed when switched from [ON] to [OFF]. Select [OK] on the conrmation screen and press the <ENTER>
button to change the setting to [OFF].
Attention
f When 3D images are viewed by unspecied number of people for commercial use, display the safety precautions message related to 3D
viewing to notify viewers.