Filter
Top Products
About Your Projector
ENGLISH -
23
Preparation
(1) LAN
Connects to a LAN cable for network connection.
(2) USB Connector (Series A)
Insert the USB thumb drive directly (refer to
“Operation Instructions, Network operations”).
(3) USB Connector (Series B)
- In order to operate the computer with the remote
control and use the <PAGE> buttons on the
remote control during a presentation, connect the
USB port of the computer to the USB terminal
with a USB cable (not supplied).
- The projector provides the "USB display"
function that the image and sound are sent to
the projector by connecting the computer to the
projector with a USB cable.
For details, please refer to the "Operation Manual
Wireless Manager ME5.5" in CD-ROM.
(4) HDMI
Connects to HDMI input signals.
(5) COMPUTER IN 1/ COMPONENT IN
Connects to COMPUTER IN 1/ COMPONENT IN
input signals.
(6) COMPUTER IN 2/ MONITOR OUT
Connects to COMPUTER IN 2/MONITOR OUT
input signals or outputs the analog RGB signals
input the projector.
(7) Security slot
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector.
Compatible with the Kensington MicroSaver
Security System.
(8) S-VIDEO IN
Connects to S-VIDEO input signals.
(9) AUDIO OUT (VARIABLE)
Outputs the audio signals input to the projector.
(10) COMPUTER AUDIO IN 2 (MIC IN)
Connects to the audio input signals. Or connect
the MIC to the this jack.
(11) COMPUTER AUDIO IN 1
Connects to the audio input signals.
(12) AUDIO IN
Connects to the audio input signals.
AUDIO IN has left and right (L and R) terminals.
(13) VIDEO IN
Connects to VIDEO input signals.
(14) CONTROL PORT
Connects to a computer via an RS-232C cable.
Attention
When a LAN cable is directly connected to the projector,
z
the network connection must be made indoors.
(1)
(4)(5)
(6)
(7)
(8)
(10)
(12)
(13)
(2)
(14)
(3)
(9)
(11)
Rear terminals