Filter
Top Products
Setting up
ENGLISH -
27
Getting Started
Adjusting front adjustable feet
Lift the front of the projector and press the feet lock latches on both side of the projector.
Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to a proper height and tilt.
You can turn the front adjustable feet to extend them. You can turn them in the opposite direction to contract
them.
(You can adjust the projection angle vertically.)
Attention
Heated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust
z
the front adjustable feet.
If keystone distortion occurs on the projected image, perform “KEYSTONE” from the “Screen” menu. (
z
Æ
page 53)
Note
Screw up the adjustable feet, and an audible click will be heard as the limit.
z
Adjustable range
Front adjustable feet : 41.2 mm(1.622")
Feet Lock Latches