Filter
Top Products
39
Settings>Calibrate Touch Screen
If you notice that the touch screen is not responding accurately, you may need to
re-calibrate the touch screen sensors.
1. Select
Settings from the Application Quick Launch Bar, tap Calibrate.
2. Tap
Calibrate to perform the calibration.
3. When the pop-up windows appear, use a pointed device to accurately tap the
“
+” in the designated spots on the screen.
4. If calibration is successful, you can resume normal use. If unsuccessful,
repeat the calibration again.
Settings>Network
In order to connect to the Internet, you must have a Wi-Fi network set up on your
pandigital novel.
1. Select Settings from the Application Quick Launch Bar, tap Network.
2. The device scans and lists all local Wi-Fi Networks found. A
indicates
secure networks that require login name/password to connect.
3. Tap the desired network to which you want to connect,
enter the Network
Password if applicable.
4. Tap to close the Settings screen.
If your Wi-Fi network is set as hidden, it won’t be found by the auto scan. Tap
Other and then enter the network name and key,
tap Save.
(Advanced): After saving the Wi-Fi network, you can change your network
settings by selecting
Manual Setup, and then follow the prompts.
Connecting to Public Wi-Fi Hotspot
If you are connecting via a public Wi-Fi hotspot, it may be necessary to
immediately launch the browser and provide the hotspot login information
prior to having an active internet connection.
1. Follow steps 1-5 above to select the hotspot Wi-Fi network.
2. Select
Web from the Application Quick Launch Bar.
3. Enter the login information as required by the hotspot.
Turn Wi-Fi Off
There may be times when you want to prevent your device from connecting
to a Wi-Fi network, even if you’ve set the network up on your device.