Filter
Top Products
3. Operation
3-68
February 2001 3160-A2-GB21-90
Changing User Interface Access Security
Procedure
To change user interface access security:
1. Press the key two times from the top-level screen.
2. Press the key three times.
3. Press the key once.
The Security screen appears.
4. Press F1 to select Lvl1, or press F2 to select Lvl2. After you make a selection,
the top-level screen appears.
If you do not make a selection within 5 minutes, the Automatic Device
Health/Status screen appears.
F1
F2
F3
DSU ESF
Stat Test Cnfig
F1
F2 F3
DSU ESF
Stat Test Cnfig
F1
F2 F3
DSU ESF
Stat Test Cnfig
F1
F2 F3
Security:
Lvl1 Lvl2