Filter
Top Products
E. SNMP MIB Objects
E-2
February 2001 3160-A2-GB21-90
MIB II (RFC 1213)
The objects defined by MIB II are organized into 10 different groups. The
DSU/CSU implements only those groups where the semantics of the group are
applicable to the implementation of a DSU/CSU. The MIB II object groups
supported or not supported by the 3100 Series devices are as follows:
System
Group
Supported.
Interface
Group
Supported for the network interface, the DTE Drop/Insert
(DSX-1) interface, the synchronous data ports, the COM port,
the AUX port, and the MODEM port. Interface statistics
(counters) apply to any port (COM, AUX, or MODEM),
whichever is defined as the SNMP management link.
Address
Translation
Group
Not supported since this group is not supported in MIB II.
IP Group
Supported.
ICMP Group
Supported.
TCP Group
Supported.
UDP Group
Supported.
EGP Group
Not supported since the EGP protocol is not supported by the
DSU/CSU.
Transmission
Group
Supported on the T1 interfaces using the DS1/E1 MIB.
Supported on the synchronous data ports using the
RS-232-like MIB. Supported on the COM, AUX, and MODEM
ports using the RS-232-like MIB.
SNMP Group
Supported.