Filter
Top Products
3. Operation
3160-A2-GB21-90 February 2001
3-65
Resetting the DSU/CSU
Use the Reset command to perform a power-on reset of the DSU/CSU.
Procedure
To reset the DSU/CSU:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the key until the Reset selection appears
on the screen.
4. Select Reset.
5. From the Device Reset screen, press F1 to initiate a reset of the DSU/CSU
(the power-up sequence screen appears). Press F2 instead to return to the
Control screen without initiating a reset.
Download Operations
NOTE:
The Download command is for use by service personnel only. Loss of primary
data could result from improper use.
F1
F2
F3
Control:
ClrReg Reset
F1
F2 F3
Device Reset:
Yes No