Filter
Top Products
3. Operation
3160-A2-GB21-90 February 2001
3-57
Initiating a Call for Front Panel Pass-Through Operation
Front panel pass-through initiates a call through the integral modem to access a
far-end DSU/CSU’s front panel from your DSU/CSU’s front panel (or PC attached
to the COM port).
NOTE:
Pass is only available when the FP Pass configuration option has been
enabled (see Appendix C,
Configuration Options
), the active physical interface
is either the front panel or the PC, and the integral modem is not already in
use.
Table 3-6. Valid Phone Number Characters
Valid
Characters Meaning Restrictions
0 to 9 DTMF or pulse digits —
* # DTMF digits —
P Selects Pulse dialing Pulse or Tone must be specified,
otherwise Tone is the default. This must
be the first character in the string,
unless the first character is B. Then, it
must immediately follow the B.
T Selects Tone (DTMF) dialing Tone or Pulse must be specified,
otherwise Tone is the default. This must
be the first character in the string,
unless the first character is B. Then, it
must immediately follow the B.
W Wait for dial tone —
B Blind dialing (you need not wait
for a dial tone before entering
the dialing sequence)
To be valid, this must be the first
character in the string.
, Creates a 2-second pause in
the dialing sequence
—
<space> ( ) - Extra characters for readability.
The space is the default
character.
—
<- End Of Number (EON)
character, terminates the dial
string and erases all characters
to the right after F3 (Save) is
pressed
—