Paradyne 3161-B3 Network Card User Manual


 
H. Asynchronous Terminal Operation
H-8
February 2001 3160-A2-GB21-90
Displaying LED Conditions
The same conditions monitored by the front panel LEDs can also be monitored by
the Display LEDs screen. This screen is most useful when the DSU/CSU is being
accessed remotely.
Procedure
To display LED conditions:
1. From the Main Menu screen, select Status.
The Status screen appears.
2. From the Status screen, select Display LEDs.
The Display LEDs screen appears (Figure H-4, Example of Display LEDs
Screen).
The screen shows a snapshot of the LEDs every 5 seconds. LEDs that are
illuminated are displayed by inverse video.
Select R
efresh to update the screen.
Figure H-4. Example of Display LEDs Screen
main/status/leds
Customer ID: Node A Model: 31xx
Slot: xx
DISPLAY LEDs
GENERAL NETWORK DTE PORT 1 PORT 2 PORT 3 PORT 4
OK Sig Sig DTR DTR DTR DTR
Fail OOF OOF TXD TXD TXD TXD
Test Alm Alm RXD RXD RXD RXD
EER PDV CTS CTS CTS CTS
BPV RTS RTS RTS RTS
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
Refresh