Filter
Top Products
10-13980-A2-GB30-40 October 1998
Remote Branch
Overview
The Remote branch of the Top-Level menu allows you
to control the remote modem’s DCP using the local
modem’s DCP. This allows you to change configuration
options and control test functions in a remote modem.
Remote DCP access is only available when using V.34,
V.32terbo, V.32bis, or V.32 modulation schemes.
Remote Branch
The following conditions must be met before using the
Remote branch:
• A connection using either the dial network or leased
lines must be established.
• The Access from Remote configuration option must
be enabled in the remote modem.
• The Remote Access Password configuration option
must be the same for both the local and remote
modems.
10