Filter
Top Products
G-13980-A2-GB30-40 October 1998
Default Configuration Options
Overview
Table G-1 lists all default configuration options for the
main four factory preset configurations. (Additional
configuration options set by the optional Cellular (Mobile)
and Cellular (PSTN) factory preset configurations are
listed under the &F5 and &F6 commands in Chapter 13,
AT Command Set and S-Registers.) An N/A indicates that
the value for this configuration option does not appear on
the LCD if that factory default configuration is selected.
Table G-1
(1 of 5)
Factory Default Configuration Options
Configuration Option
Async Dial and UNIX
Dial Default Settings
Sync Dial
Default Settings
Sync Leased Answer/
Originate Mode
Default Settings
DTE INTERFACE
Async/Sync Mode
Async DTE Rate
# Data Bits
Parity Bit
# Stop Bits
DTR Action
DSR Control
RTS Action
CTS Control
RTS/CTS Delay
LSD Control
TX Clock Source
CT111 Rate Control
DTE Rate = VF Rate
Async
19,200 bps
8
None
1
Ignore
Forced ON
Ignore
Forced On
Wink When Disc
1
0 msec
Standard RS232
Wink When Disc
1
N/A
Disable
Disable
Sync
N/A
N/A
N/A
N/A
Standard RS232
Standard RS232
Standard RS232
Standard RS232
0 msec
Standard RS232
Internal
Disable
Disable
Sync
N/A
N/A
N/A
N/A
Ignore
Standard RS232
Standard RS232
Standard RS232
0 msec
Standard RS232
Internal
Disable
Disable
1
UNIX Dial default setting only.
G