Filter
Top Products
B-13980-A2-GB30-40 October 1998
Result Codes
Overview
Table B-1 lists all the result codes 3800Plus modems
may send to the DTE. Result codes can be numeric or
verbal, terse or extended. See the Qn, Vn, and
Xn commands in Chapter 13, AT Command Set and
S-Registers for more information.
Table B-1
(1 of 3)
Result Codes
Numbers (1)
Numbers (2) Word Description
0 0 OK Command executed
1 1 CONNECT Modem connected to line
2 2 RING Modem receiving a ring voltage from the VF line
3 3 NO CARRIER Modem lost or does not detect carrier signal, or
does not detect answer tone
4 4 ERROR Invalid command
5 5 CONNECT 1200* Connection at 1200 bps
6 6 NO DIALTONE* No dial tone detected
7 7 BUSY* Busy or trunk busy signal detected
8 8 NO ANSWER* No ‘‘quiet” answer (@)
10 10 CONNECT 2400* Connection at 2400 bps
11 11 CONNECT 4800* Connection at 4800 bps
12 12 CONNECT 9600* Connection at 9600 bps
13 16 CONNECT 12000* Connection at 12,000 bps
14 13 CONNECT 14400* Connection at 14,400 bps
15 14 CONNECT 19200** Connection at 19,200 bps
16 15 CONNECT 7200* Connection at 7200 bps
B