Filter
Top Products
Configure Branch
8-53980-A2-GB30-40 October 1998
Editing and Saving a Configuration Option
The following example shows how to change the
Remote Access Password using the DCP. (If you ever
intend to access another 3800Plus Series modem via the
Remote branch of the Top-Level menu, the Remote
Access Password must be the same for both modems.) By
following these procedures you learn how to load a
factory preset configuration area (in this case, Async
Dial), how to edit a configuration option (Remote Access
Password), and how to save changes to a configuration
area (Active (Saved)). The shaded key indicates what key
to press.
F1
Idle : 28.8
Test Configure
F2
F3
Select Configure from the Top-Level menu.
F1
Ld EditArea frm >
Activ (Operating)
F2
F3
F1
Ld EditArea frm <
Factory
F2
F3
Select the Factory configuration area.
F1
Ld Fact Preset : >
Async_Dial
F2
F3
Select Async_Dial.
F1
Choose Function
Edit Save
F2
F3
Select Edit.
F1
Edit StrapGroup >
DTE_Interface
F2
F3
Scroll to and select the Misc configuration options
group.
F1
Edit StrapGroup <
Test Misc
F2
F3
F1
StrapsWhenDisc >
Nxt No_Change
F2
F3
Select Nxt until RemAccssPasswrd appears.
F1
RemAccssPasswrd
NxtąĄ°0
0000000
F2
F3