Filter
Top Products
Status Branch
6-53980-A2-GB30-40 October 1998
To access Record from the Status branch, make the
following selections:
F1
Status <
Options Record
F2
F3
Press the key until Record appears. Select Record.
F1
Record Status
Display Clear
F2
F3
To display sequence faults, select Display.
F1
Record Number 1
Modem O.K.
F2
F3
The LCD displays the first sequence fault field.
(Sequence fault fields range from 1 to 8 and are identified
by a number in the upper right corner.) Press the
key
to view the remaining fields. The message Modem O.K.
appears if no sequence faults have occurred.
To remove sequence fault records from both the LCD
and nonvolatile memory, select Clear. The message
Modem O.K. appears.
To exit this function and remain in the Status branch,
press the
key. To exit and return to the Top-Level
menu, press the
key.
AT Command Equivalent
There is no AT command for Record.