Filter
Top Products
Troubleshooting
9-44
9161-A2-GH30-30
April 1998
Aborting All Tests
Use the Abort All Tests selection from the Test menu to abort all tests running on
all interfaces, with exception to Network- or DTE-initiated loopbacks. To abort
individual tests that are active, see
Starting and Stopping a Test
on page 9-43.
" Procedure
To abort all tests on all interfaces:
1. Follow this menu selection sequence:
Main Menu
→
Test
2. Select Abort All Tests and press Return.
Command Complete appears when all tests on all interfaces have been
terminated.
NOTE:
Abort All Tests does not interrupt DTE-initiated loopbacks.
Determining Test Status and Results
Current test status and results are available on the:
H Test screen from where you execute the test
H System and Test Status screen
H NMS
H Test LED
For more information on interpreting results and messages, see
Chapter 7,
Displaying System Information
.