Filter
Top Products
Setting Up
5-39
9161-A2-GH30-30
April 1998
Assigning DSX-1 Timeslots to the Network Interface
DSX-1 timeslots are assigned by channel allocation, where you specify individual
timeslots. The DSX-1 interface must be enabled to assign DSX-1 timeslots to the
Network interface.
Value
Meaning
N
xx
The lower field represents timeslot
xx
of the selected Network
interface.
Assigned The timeslot is already assigned to something other than a DSX-1
timeslot, so it is unavailable. Assigned timeslots cannot be modified
from this screen.
Available The timeslot is currently unassigned.
D
ss
-
p
/
yy
Timeslot
yy
of DSX-1 interface
p
in slot
ss
is assigned to the
Network timeslot identified right above it (N
xx
).
Timeslot assignment rules:
H Valid Network timeslots are either labeled as Available, or contain a DSX-1
timeslot assignment
H Valid DSX-1 timeslots are those that are unassigned, and the currently
assigned timeslot
H Order of display is as follows:
— Available is the first selection
— Then, from lowest DSX-1 interface to the highest DSX-1 interface
— Then lowest available timeslot number to the highest available timeslot
number
For example, if the cursor is on a field with the Available value under assigned
timeslot N
xx
, pressing the Spacebar causes this field’s values to cycle through all
valid DSX-1 timeslots, starting with D
ss
-
p
/
yy
, assuming it is unassigned. If
D
ss
-
p
/
yy
is already assigned, the next valid timeslot in the order described above
is displayed.