Filter
Top Products
5-1
9161-A2-GH30-30
April 1998
Setting Up
5
Considerations When Setting Up
When setting up the system, you need to:
H Arrange for T1 service.
H Plan your channel map. See
Assigning Cross Connections
on page 5-36 for
more information.
H Choose a management configuration. Decide how you want to manage the
system:
— Locally through the T1 access unit’s communications (COM) port either
directly or remotely through a modem.
— Through an asynchronous terminal interface or Telnet session, or through
an SNMP NMS.
H Determine whether you want alarms generated and how you would like the
system to communicate alarm information to an ASCII terminal/printer or a
management system.
Configuring for Alarms and Traps
on page 5-64 tells
you how to set alarms.
H Determine whether you want traps generated and how you would like the
system to communicate trap information to an ASCII terminal/printer or a
management system.
Setting Up for SNMP Management
on page 5-70 tells
you how to set SNMP traps.
H If you are managing the system using an SNMP NMS or Telnet, select an IP
addressing scheme.