Filter
Top Products
A. OLCmd Reference
7800-A2-GB32-00 January 2002
A-27
OLCmd sync
The
sync
command synchronizes a specified device and the database. If the
device is not in the database, it is added.
Format:
OLCmd sync
[ [
-v
] [
-c
community-string
] [
-w
community-string
]
[ [
-i
ftp_user
] [
-p
ftp_passwd
] ] [
-g
groupid
] [
-s
] [
-f
] [
-d
domain
]
[
-I
minutes
] [
-k
days
] [
-r
days
] [
-h
] [
-A
] [
-S
] [
-E
] [
-O
]
[
ip_address
|
hostname
] ]
Where:
ip_address
Is the address of the device to be synchronized.
hostname
Is the host name of the device to be synchronized.
-v
Specifies that debugging information should be
returned.
-c
community-string
Sets the name of the read community string for the
device.
-w
community-string
Sets the name of the write community string for the
device.
-i
ftp_user
Specifies the user ID for the FTP session used to
collect performance statistics.
-p
ftp_passwd
Specifies the password for an FTP session initiated by
ftp_user.
-g
groupid
Specifies the group ID for the device.
-s
Enables SCM polling (for DSLAM devices only).
-f
Enables user history polling (for FrameSaver devices
only).
-d
domain
Specifies the domain where the poller/reader resides.
-I
minutes
Specifies the number of minutes between polls. This
should be less than 1440 (24 hours) to ensure that no
data is lost.
-k
days
Specifies the number of days’ worth of hourly report
data that should be maintained for the device.
-r
days
Specifies the number of days’ worth of quarter-hourly
report data that should be maintained for the device.
-h
Specifies that the device is a head-end FrameSaver.
-A
Causes the parameters to be saved without
synchronizing the device.
-S
Requests that circuits and endpoints be discovered in
the course of synchronizing the device.