Filter
Top Products
A. OLCmd Reference
7800-A2-GB32-00 January 2002
A-29
OLCmd uhread
The
uhread
command starts and stops the User History Reader (UHReader) from
a command line. It can be used to process user history records automatically
during periods of low network activity.
Format:
OLCmd uhread
-c
command
[
-n
poller-name
]
Where:
Example:
The following command causes UHReader to read all collected user history poll
files, then stop:
OLCmd uhread -c singleRead
-c
command
Specifies the action to be taken.
command
may be
one of:
singleRead
– Reads all collected user history
poll files, then halts
run
– Runs UHReader until the shutdown
command is issued
shutdown
– Shuts down UHReader if it is
running
status
– Shows the status of UHReader
-n
poller-name
Optionally specifies the poller domain to read from
when the singleRead or run command is issued. If
no poller domain is specified, all poller domains
are read.