Filter
Top Products
Setup Command Menu 84
Model 2160 Series User Manual 5 • Console and Telnet configuration
Queue Egress Rate
Queues 0-3 can set up the egress rate for WFQ configuration.
The egress rate N value can be set from 0 to 22. The N value 0 means no limits.
The egress data rate is a multiple of 1024kbps.
For example, the egress data rate = N value (1 to 22) x 1024 Kbps.
Port-Based Priority QoS
-----------------------------------------------------------------------------
Command: setup qos portPri <1~6> <0~3>
Message: Please input the following information.
Port index <1~6>: 1
Queue index (ENTER for default) <3>: 3
-----------------------------------------------------------------------------
Set up the queue value (0, 1, 2 or 3) on each port.
VLAN Tag Priority QoS
----------------------------------------------------------------------------
Command: setup qos vlanTagPri <0~7> <0~3>
Message: Please input the following information.
VLAN TAG index <0~7>: 0
Queue index (ENTER for default) <1>: 1
-----------------------------------------------------------------------------
Set up the queue index (0, 1, 2 or 3) on Priority VLAN Tag.
q0GrssRt Modify queue 0 egress rate
q1GrssRt Modify queue 1 egress rate
q2GrssRt Modify queue 2 egress rate
q3GrssRt Modify queue 3 egress rate
Table 24. Egress Rate (N Value)
Port
Egress Queue
0 1 2 3
LAN 1
LAN 2
LAN 3
LAN 4
DSL
Table 25. Port-Based Priority QoS Options
Port 1 (LAN1) 2 (LAN2) 3 (LAN3) 4 (LAN4) 5 (Line) 6 (Sniffing)
Queue Index