Peerless Industries HDS200 Network Router User Manual


 
13 of 36
ISSUED: 07-24-12 SHEET #: 180-9023-1
Receiver Front
1. Power/Link
Blinking indicator light - System booting or establishing link between the Transmitter and the Receiver.
Rapid blinking indicator light - Software upgrading or wireless/LAN mode switching.
Solid indicator light - Link between the Transmitter and Receiver has been established and is ready for
signal transmission.
2. HDMI
The HDMI indicator light will be illuminated when the HDMI port is selected for video output.
If there is no signal, and/or the cable is not connected, the indicator light will blink.
3. COMPO
The COMPO (component) indicator light will be illuminated when component output is selected for video
output.
If there is no signal, and/or the cable is not connected, the indicator light will blink.
4. AV
The AV indicator light will be illuminated when the AV port (composite) is selected for the video output.
If there is no signal, and/or the cable is not connected, the indicator light will blink.
5. IR Window
IR receiving window enables remote control of components.
6. Power/Source Selection Button
Press and hold for 3 seconds to turn on the unit.
When powered on:
º Press to select the video input source. Each press of the button will cycle through the available
video input "HDMI COMPO AV HDMI" in sequence.
º Press and hold for 8 seconds to turn the unit off.