Peerless Industries HDS200 Network Router User Manual


 
27 of 36
ISSUED: 07-24-12 SHEET #: 180-9023-1
Note: Peer-to-Peer units can be con gured to multicast mode using the USB Multicast Set-Up Method or LAN
Multicast Set-Up Method. Additional Receivers (HDS200-R) are required and sold separately. Please visit
http://www.hd ow.com/Tech-Support for programming instructions.
Multicast Modes
Multicast Wireless Mode
Multicast Wireless Mode is a pre-con gured setting that enables the Transmitter to stream AV media from
one Transmitter to up to four Receivers. All multicast systems come precon gured to wirelessly stream to the
speci ed number of Receivers.
Available Multicast Models
Model Capability Mode
HDS200-2: HD Flow Pro Wireless Multimedia Kit: streams to two display devices Multicast Wireless
HDS200-3: HD Flow Pro Wireless Multimedia Kit: streams to three display devices Multicast Wireless
HDS200-4: HD Flow Pro Wireless Multimedia Kit: streams to four display devices Multicast Wireless
Multicast LAN (wired) Mode (Advanced Settings)
Multicast LAN (wired) Mode is an available con guration for applications where wireless signal transfer is
not desired, allowed or surpasses wireless distance limitations. This mode allows for the Transmitter to be
con gured to an existing LAN to transmit AV signal to multiple Receivers. Please visit http://www.hd ow.com/
Tech-Support for step-by-step LAN programming instructions.
Note: Additional Receivers (HDS200-R, sold separately) are required when adding on to a peer-to-peer system.
Converting a Peer-to-Peer Wireless HD Flow Multimedia Kit to a Multicast Wireless
Multimedia Kit
After the purchase of additional Receiver(s), part number HDS200-R, use the following instructions to add the
Receiver(s) to the current system.
USB Multicast Set-Up Method
To set up the HD Flow Pro Multimedia Kit as a multicast system that transmits to 2, 3 or 4 Receivers using the
USB Multicast Set-Up Method please visit http://www.hd ow.com/Tech-Support to view the instructional
video.
LAN Multicast Set-Up Method (Advanced Settings)
To set up the HD Flow Pro Wireless Multimedia Kit as a multicast system that transmits to 2, 3 or 4 Receivers
using the LAN Con guration Method please reference the instruction manual that comes with the HDS200-R or
visit http://www.hd ow.com/Tech-Support to download instructions.
LAN - Wired Connection Mode
The wired connection mode requires a CAT5e/6 cable to be connected to the LAN ports between the
Transmitter and Receiver. HD Flow Pro Wireless Multimedia Kit comes standard with enabled wireless
connection. Setup for LAN operation is required. Please visit http://www.hd ow.com/Tech-Support for step-
by-step LAN programming instructions.