Filter
Top Products
Tech
Tech
Tips
Helpful Tips for Pelco Products
World Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Information subject to change without notice.
©Copyright 2008, Pelco, Inc. All rights reserved.
Page 10 of 21 DX8100-ISCI_SCSI_CARD_SATABoy.fm
Figure 4
Configure SATABoy with 8 or 14 HDs
1. Open the Internet Explorer
2. Highlight the address bar and type 10. 11. 12. 13 and press Enter.
3. Click the Login button.
4. Click Configure Network under the main menu.
5. On the Configure Network, type X.X.X.X next to the IP address where X.X.X.X is the individual
address assigned to each SATABoy. 192.168.0.2 is the sample IP address. (See Figure 5)
13