Filter
Top Products
Tech
Tech
Tips
Helpful Tips for Pelco Products
World Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Information subject to change without notice.
©Copyright 2008, Pelco, Inc. All rights reserved.
Page 11 of 21 DX8100-ISCI_SCSI_CARD_SATABoy.fm
Figure 5
1. Click Save Configuration and close the screen.
2. Reset the SATABoy by turning off the unit for 10 seconds.
3. Unplug the Cat5 Crossover cable.
4. Plug in the network cables into the system and SATABoy
5. Power on SATABoy and wait for 60 seconds before opening Explorer.
Resume Computer Configuration
1. Right click My Network Places on the desktop and then left click Properties.
2. Right click Local Area Connection and then left click Properties.
3. Left click Internet Protocol (TCP/IP).
4. Click Properties.