Filter
Top Products
27964-01A
8
Installation - Assembly Procedures
Attach Gas Springs
1. With the canopy still raised, slip the
bronze bushings into the hole in the
clevis brackets on the underside of the
canopy arms.
2. Line up both clevis forks and carefully
lower the canopy to engage the clevis
forks. P
a
y special attention when low-
ering the canopy that the clevis forks
do not damage the bronze bushings.
Bronze is excellent for smooth pivot-
ing applications such as this, but
tends to be soft compared to the
steel clevis fork.
3. Lock the clevis forks in place
with the 10mm clevis pins.
4. Secure the clevis pins with the
retaining rings.
NOTE: When this assembly is complete,
lift and lower the canopy a few times to
lubricate the gas springs for optimum per-
formance.
Clevis Bracket