Filter
Top Products
27964-01A
4
Installation - Assembly Procedures
Assembly Procedures
Lower Clevis Fork Assembly
1. Insert the larger clevis pin (3/8” x 2
1/64”) through the hole directly below
the large hole in one of the stand
uprights, as shown.
2. Slide a centering spring, a clevis fork
and then another centering
spring onto the clevis pin
and insert the pin the
rest of the way
through the upright.
3. Secure the clevis
pin by inserting
the straight portion
of a bridge pin
through the small
hole in the end of
the clevis pin.
4. Repeat for the other
stand upright. Make sure
the clevis forks point upwards
as shown.
STAND UPRIGHT
CLEVIS PIN
CENTERING SPRING
CLEVIS FORK
BRIDGE PIN