Pioneer ML310 Server User Manual


 
Removal and replacement procedures 32
To replace the component, reverse the removal procedure.
Diskette drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
To remove the component:
1. Power down the server (on page 25).
2. Remove the bezel (on page 25).
3. Remove the access panel ("Access panel" on page 26).
4. Disconnect the power and data cables.
5. Remove the diskette drive.
To replace the component, reverse the removal procedure.
CD-ROM/DVD-ROM drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
To remove the component:
1. Power down the server (on page 25).
2. Remove the bezel (on page 25).
3. Remove the access panel ("Access panel" on page 26).
4. Disconnect the power and data cables.