Filter
Top Products
PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5
225
Lens Assy (Green)
Lens Assy
(Blue)
Lens Assy
(Red)
6
Slide the screen to right, and
adjust the focus of the lens.
Notes:
To assemble the screen, perform the above procedures in reverse
order.
After assembling it, verify that the right and left sides of the screen
are positioned as shown in the figure.
Screen
Fit left side edge of the screen
to center of cabinet hole.
Cabinet
Disconnect the Anode Cable
WARNING:
Before disconnect the anode cable, turn off the power, unplug the
AC plug and let the unit discharge for more than 1 minut.
Rubber
Cover
Holding the rubber cover firmly,
turn counterclockwise and
check that the lock has
been disengaged.
FBT
Pull straight up
Anode Cable
Note :
When reconnecting the cable, proceed in the
reverse order. After reconnecting, tug on the
cable to check that it is secure.